A good antenna that can be used for the car as well as the house is an HALO. This antenna maintains good omni-directional horizontal polarization. Basically the antenna is a half wave dipole bent into a circle,BUT shorter than a dipole for this frequency. The circumference is 60-70 inches. By useing the gamma match (see…
Tag: 6m
6m J-Pole by WB5CXC
Use a 54” piece of 450 ohm Ladder line. Cut out 3 inches of the center part of the ladder line. Solder a PL-259 on the bottom of the Ladder Line (both side of the ladder line will solder on the ground side of the PL-259 – this is used for the shorted part of…
Six Meter Wavelength Band Antennas
The advent of new, affordable MF/HF/VHF radios in the last few months from virtually all the major manufacturers, has spurred a migration by more and more Hams to the Six Meter band. I’m often asked, “What antennas are best for Six Meters?”. Before answering a question like this, I must first ask the Ham what…
2 Element Yagi for 50 Mhz
G3SYC designed this antenna in about 1990. The antenna works best between 15 and 20 feet off the ground, and can be worked some nice dx with it. The antenna is easily folded up and stored away when not in use, and has a minimal impact when erected . SPACING Inches ELEMENT LENGTH (Inches) …
6 Meter Halo Antenna Design
This halo antenna by KB1DIGÂ is made with a true Gamma Section this time and is fashioned from aluminum. Most of the parts are leftovers from old car projects. The best part is it’s omnidirectional! The 3/8″ fuel-line I used came from Summit Racing Equipment: http://store.summitracing.com #SUM-G2538, and a 25′ section costs…