Short Vertical for 160 meters by I5CDF
Vertical Folded antenna for 160 meters band
Vertical Folded antenna for 160 meters band
I’ve recently introduced a Raspberry PI 4 as main remote RTX controller for my Kenwood TS-590s. This allows me to control the Kenwood TS-590S from the iMac simultaneously with several applications, including RUMLOG, FLDIGI, WSJT-X. The issue Could not control simultaneously my transceiver directly from two or more applications. Additionally remote connection from the internet
Dimentions Elements A, B, C spacing between elements 119.38 cms. E 1 Reflector 1: 304,8 cms. E 2 Radiator : 274,32 cms. E 3 Director : 271,15 cms. E 4 Director: 269,24 cms. D Distance with gamma match: 35, 56 cms aprox. E Gamma spacing: 7,62 cms. F Gamma tune: 50,8 cms x 12,5 mm
About vertical antennas by W1ICP
The Clemens match is easy to make and reliable, and is preferable to a single Gamma match as it is balanced. I was first introduced to the Clemens match by G4IGO several years ago, Ken builds his in a slightly different way by putting the capacitor at the feeder end and connecting the far end
Taken from a usenet post by John Doty in 1996 In article <9612182335114148@mogur.com> len.anderson@mogur.com (Len Anderson) writes: > TV>> I wonder if a longwire balun would help match the impedance & provide a> TV>> better signal? > No, it will (primarily) change only the magnitude of the antenna> impedance over frequency. Some bands will have
A good antenna that can be used for the car as well as the house is an HALO. This antenna maintains good omni-directional horizontal polarization. Basically the antenna is a half wave dipole bent into a circle,BUT shorter than a dipole for this frequency. The circumference is 60-70 inches. By useing the gamma match (see
Use a 54” piece of 450 ohm Ladder line. Cut out 3 inches of the center part of the ladder line. Solder a PL-259 on the bottom of the Ladder Line (both side of the ladder line will solder on the ground side of the PL-259 – this is used for the shorted part of
Mars Cap and freeband modification for the VX-7R transceiver
I recently had a conversation on the radio with another Ham who had built a 6 Meter wavelength band “J” antenna. He was getting some rather strange performance from this design, so I asked him where or how he had come up with the antennas dimensions. He referenced an Internet web page to me where