Amateur Radio made in Italy
For 802.11(b or g) Wireless Networks or other 2.4GHz Applications – by Gregory Rehm Got no dough for a commercial WiFi antenna? Looking for an inexpensive way to increase the range of your wireless network? A tin can waveguide antenna, or Cantenna, may be just the ticket. This design can be built for under $5…
Simple, inexpensive ham radio satellite antenna project
Schematics of a Dual Band Log Periodic Antenna by VA2PHI
Quadruple Quad by Richard Price BSc. MSc. GW0VMW A suitable high gain 70cms antenna for SOTA operation was sought that did not have the drawbacks of a long Yagi antenna, principally a narrow beamwidth and bandwidth. This is important as operating from a hilltop on a relatively under used band requires as broad a catchment…
An homebrew dual band j-pole antenna
A Dualband QUAD made with two identical square loops, whose sides measure a quarter wave (?/4), connected together
There are three connection possibilities to feed the multi-band copper cactus antenna with a single feedline or coax. However, it is imperative that you use the proper coax for the highest band of operation, RG58 just won’t cut it and even RG8 in lengths longer than 25 feet is marginal in 440 operation. For all…
The advent of new, affordable MF/HF/VHF radios in the last few months from virtually all the major manufacturers, has spurred a migration by more and more Hams to the Six Meter band. I’m often asked, “What antennas are best for Six Meters?”. Before answering a question like this, I must first ask the Ham what…
A simple 2.4 GHz double QUAD Antenna
This was my first AO-10 antenna. As goofy as it looked, I managed a few contacts with 10 Watts, including Brazil on SSB. This is a pair of 8-element quagi’s, set up for RHCP. Construction is simple, with no critical tuning elements. They are made from 1/2″ PVC pipe and # 10 wire (stripped from…