Article by Charles Greene, W1CG My 4:1 current-type balun is wound on a FT-114-43 core. The FT-140-43 is a little easier to work with, and maybe the FT-140-77 would cover 160-10. This one is reasonably flat from 4.5 to 35 MHz but drops off a little at 3.5, 40-ohms with a 200 ohm resistor on…
Author: Simone
HF Log Periodic Antenna
A plan for HF Log Periodic Antenna working 10-20 meters band by VA2PHI Pictures originally available at http://hb9tmw.free.fr/EuroNet/HTML/loghf.html
YOTA 2015 – trip to Florence
A visit to Florence by the Ham YOTA 2015 group
YOTA 2015 – II5YOTA
My recent visit to YOTA 2015
Modifying HP Server Power Supplies for Ham Radio Use
This article documents the modification of 2 typesof Hewlett Packard switching power supplies to enable their use as power sources for ham radio equipment. Obsolete server power modules can be bought from online dealers at very good prices due to the massive replacement of older network servers; typical prices for a unit are as low…
A Sleep Strategy for DX Contesting
A Sleep Strategy for DX Contesting This article originally appeared in the National Contest Journal. Why am I here? Listen to all these signals. Who are they? Wonder what they are doing? All this CW sure sounds nice. What should I do with this keyer paddle? Should I push this button? I can turn this…
K9FV 40 meters band loop
A magnetic loop for 40 meters band
Build a Motor Driven Magnetic Loop Antenna
GM4XRF Magnetic Loop antenna project
W2BRI Magnetic Loop homebrewing guide
Home made your own magnetic loop antenna
Kenwood TS-590 the Elecraft K3 killer… not sure !
Kenwood TS-590 the Elecraft K3 killer… not sure !



