How to configure JT65 to work with HamRadioDeluxe and Kenwokd TS 590
I have a TS-590S using the USB audio input.
Here is my setup:
On JT65-HF, click on Config, and then Rig Control tab.
Enter for PTT port “none”
and select Enable HRD V.5 (assuming you are using V.5)
Clear the “use HRD for PTT” checkbox.
Then open DM780 and go to Program Options, and select “PTT”
Select “via soundcard”
Save, and see if that doesn’t work for you.
I found that if you don’t select “Via soundcard” in DM780 you don’t get any transmit audio.
In the TS-590 option 69 (VOX OPERATION WITH DATA)Â show be set to ON